How-to · Designers
Getting started with the Designer Collection
Register, search, make a board, check availability and get a quote: the whole collection, step by step.
How to use the Designer Collection, Enlighten Pro's library of 4,400+ decorative lights for architects and interior designers. Register once, search in your own words or with a photo, narrow it down, open a design in full, build a board for each room, then check availability and ask for a quote.
More videos
0:44TL06 FrameOne
A framing light that trims its beam to the edge of the artwork.
0:39CB02 Cone
A COB downlight with the light set back deep in its cone.
1:09Sonic Beam
A Bluetooth speaker that runs on the lighting track.
1:21CIANA Elance' installation
A full run of the 6mm magnetic track, from bare ceiling to lit luminaires.
0:58Fabric belt installation
A woven 48V belt hung in curves between nodes, taking power off the track.
1:58Data sheets and CAD drawings
Two free tools for channel partners: a technical data sheet in your firm's name, and a bill of quantities from a CAD drawing.
1:09Become an Enlighten Pro channel partner
Apply in a minute, then see your own net prices, your dashboard, your certificate and project protection.
0:48Find the right fitting in our catalogue
Family, installation, cutout, wattage, light source, aiming and fitting: from over 1,100 products to the three that fit.
0:45Find the right fitting, on your phone
The same catalogue search on your phone: from over 1,100 products to the three that fit.
3:04The Designer Collection, on your phone
The same walk-through, made for a phone screen.