Light, drawn in a line.

Habl is a Ø 27 mm silicone light rope dressed in braided nylon. It glows evenly around its full circumference, bends where you bend it, and is built piece by piece to a drawing — yours or ours. There is no catalogue of fixed sizes and no price list: every Habl is quoted against its drawing.

Ø 27 mm360° emission24 V systemsilicone · braided nylonmade to length

See what we build Plan your Habl piece

The material

A continuous LED core runs inside a solid silicone body, so the light has no facets and no dark side — it reads as one unbroken line from every angle. The braided nylon jacket gives it the hand of a rope, not a tube.

Runs are cut and terminated to your drawing in our works, driven at 24 V from remote drivers, and hung from hardware finished to match the space.

Satin BrassBlackened BrassAntique BrassSatin NickelPolished NickelSatin Copper

A lit length of Habl rope held in one hand, the nylon braid visible through the glow

Close detail of the braided nylon jacket, unlit, coiled on the drum

The numbers

One rope, one system. Every piece on this page is built from the same material and driven the same way — what changes is the shape and the length.

Diameter: Ø 27 mmSilicone body, braided nylon jacket
Emission: 360°Even around the full circumference
Input: 24 V DCRemote driver, sized with the piece
Power: 24 W/mPer metre of lit rope
Colour rendering: CRI 90Standard on every run
Colour temperature: 3000 / 4000 / 5000 KChosen per piece; tunable options below
Single run: 2.5 mLonger forms are built from several runs
Protection: IP54Indoor and sheltered outdoor

Dimming and control

Specify the protocol with the piece — the driver and the run are built to match it.

TRIAC Bluetooth Mesh · dim + tune DALI-2 DT6 DALI-2 DT8 · dim + tune

Compose your Habl piece

Pick a family, place the hardware, and draw the rope — it snaps to its feed points and relaxes into the curve gravity would give it, at true scale against a real room. The counter keeps the rope, the runs and the bill of parts honest as you go.

How a piece happens

EnquireSend a sketch from the designer above, a reference, or just the room.

DrawingWe return a dimensioned drawing of the piece — form, lengths, hardware.

QuoteThe quote is against that drawing. Approve both before anything is built.

Build & testCut, terminated, hung and burn-tested in our works before packing.

Install supportMounting plan and our team on call for your electrician.

Most pieces leave our works 2–3 weeks after you approve the drawing and the quote.

What we build with it

One material, four families. Each opens a set of forms our works already builds — use them as starting points, or draw something of your own in the designer above.

Draped Habl loops filling a double-height hotel lobby

Ceiling compositionsLoops and sweeps across the ceiling plane, sized by ceiling height.

Three slim Habl pendants over a kitchen island

Hanging pendantsVertical drops, hooks and clusters from a single canopy.

A brass bar with Habl rope slung beneath it in two sweeps

Linear pendantsA brass bar carrying the rope straight, swept or in script.

A narrow Habl U above a console in a living room

Wall sconcesThe rope hung from a slim rail, swaying and looping off the wall.

Ideas

Ways a line of light can carry a space — browse by family, open one, and take it as the start of your own piece.

Scenes are visualisations of buildable Habl forms — not photographs of completed installations.