← Back to catalogue

Acoustic Luminaires

Model code EN-ACL

Felt acoustic pendant lights. Each shade is formed from 100% PET acoustic felt, so the fitting does two jobs at once — it delivers ambient light and absorbs sound in the space around it.

The felt softens reverberation and takes the edge off ambient noise, which makes the family a natural fit for open-plan offices, meeting rooms, hospitality interiors and homes. The range spans eighteen designs — from linear bars to drums, globes and sculpted shells — in a wide choice of felt colours.

The range 18 designs

EN-ACL-001 · Atrium

A wide, gently flared drum with pressed vertical seams. The open base throws light down over a table while the felt body absorbs the room above.

EN-ACL-001 · Atrium
Small
580 mm (w) × 340 mm (h)
Large
700 mm (w) × 460 mm (h)

EN-ACL-002 · Belfry

A steep conical shade, narrow at the top and wide at the mouth. It drops a tight, directional pool of light onto a table or counter.

EN-ACL-002 · Belfry
Small
540 mm (w) × 400 mm (h)
Large
740 mm (w) × 600 mm (h)

EN-ACL-004 · Torus

Stacked circular fins around a central spine. Light escapes between the ribs, so the fitting reads as a soft glowing volume rather than a point source.

EN-ACL-004 · Torus
Small
450 mm (w) × 300 mm (h)
Large
600 mm (w) × 400 mm (h)

EN-ACL-007 · Transept

Two crossing felt beams with a continuous lit line beneath. Specify as a single run, or crossed and staggered to break up a long ceiling.

EN-ACL-007 · Transept
Thickness
30–50 mm
Small
1200 mm (L) × 300 mm (h)
Large
2400 mm (L) × 300 mm (h)

EN-ACL-008 · Fanlight

Overlapping petals cut from flat felt sheet and splayed into a shallow fan. It is at its best seen from below in a double-height space.

EN-ACL-008 · Fanlight
Small
400 mm (w) × 200 mm (h)
Large
600 mm (w) × 300 mm (h)

EN-ACL-009 · Rosette

Flat felt blades radiating from a lit centre. It reads as a piece of wall-height sculpture by day and a soft burst of light after dark.

EN-ACL-009 · Rosette
Small
400 mm (w) × 200 mm (h)
Large
600 mm (w) × 300 mm (h)

EN-ACL-012 · Bastion

A faceted, tapered shade. The creased corners catch light differently from the flat panels, which gives the felt visible depth from across a room.

EN-ACL-012 · Bastion
Small
560 mm (w) × 260 mm (h)
Large
700 mm (w) × 350 mm (h)

EN-ACL-013 · Cloister

A hexagonal cage of vertical felt slats. Light spills through the gaps in bands, which keeps a tall fitting from feeling heavy overhead.

EN-ACL-013 · Cloister
Small
450 mm (w) × 450 mm (h)
Large
700 mm (w) × 700 mm (h)

EN-ACL-015 · Alcove

A soft-cornered cube, open below. The simplest form in the range, which makes it the one that repeats well in grids over long tables and lounge seating.

EN-ACL-015 · Alcove
Small
580 mm (w) × 340 mm (h)
Large
700 mm (w) × 460 mm (h)
Custom
750 mm (w) × 750 mm (h)

EN-ACL-017 · Colonnade

A long pleated body with a lit lower edge. The fluting adds absorptive surface to a shape that would otherwise be flat, so it works hard over a boardroom table.

EN-ACL-017 · Colonnade
Small
1200 mm (L) × 300 mm (h) × 168 mm (w)
Large
2400 mm (L) × 300 mm (h) × 168 mm (w)

EN-ACL-018 · Grotto

Curved felt leaves wrapped around a vertical lamp and closed into a rounded globe. The warm inner glow reads through the gaps between the leaves.

EN-ACL-018 · Grotto
Small
450 mm (w) × 400 mm (h)
Large
650 mm (w) × 600 mm (h)

EN-ACL-020 · Rotunda

A domed shell of closely spaced fins — dense enough to absorb well, open enough at the base to deliver a clean pool of light below.

EN-ACL-020 · Rotunda
Size
Ø 570 mm × H 410 mm

EN-ACL-021 · Eclipse

Two offset drums that slide past one another. It is asymmetric from every angle, which suits a round table or a corner that needs an anchor.

EN-ACL-021 · Eclipse
Size
Ø 600 mm × H 300 mm

EN-ACL-022 · Cupola

A slatted dome with an exposed lamp at its centre. The gaps between the slats throw fine lines of light up onto the ceiling.

EN-ACL-022 · Cupola
Small
450 mm (w) × 400 mm (h)
Large
650 mm (w) × 600 mm (h)

EN-ACL-023 · Terrace

Two stacked pleated tiers. The upper ring conceals the source and the lower one catches the light and returns it as a soft halo.

EN-ACL-023 · Terrace
Size
Ø 600 mm × H 400 mm

EN-ACL-024 · Medallion

A shallow disc edged with radial fins, barely 50 mm deep. For ceilings too low to carry a hanging volume but noisy enough to need the felt.

EN-ACL-024 · Medallion
Size
Ø 600 mm × H 50 mm

EN-ACL-025 · Nave

A tapered drum in pleated felt — the quietest shape in the range. It suits interiors where the lighting is not meant to announce itself.

EN-ACL-025 · Nave
Size
Ø 600 mm × H 400 mm

EN-ACL-026 · Vault

A deep domed shell with rounded vertical ribs. It carries the largest unbroken felt surface in the range and spreads light widely from a high ceiling.

EN-ACL-026 · Vault
Small
Ø 550 mm × H 300 mm
Large
Ø 750 mm × H 400 mm

Applications

Mounting

Browse the full Enlighten Pro catalogue

Made on our own tooling

Enlighten Pro controls the manufacturing chain from raw aluminium to finished luminaire — which is why a specification can be held, a finish repeated, and a batch traced.

Our own moulds and dies

The tooling behind our castings and extrusions is ours — ADC-12 for pressure die casting, AL6063 for extrusion.

Machining in-house

CNC machining centres, VMC and precision lathes. Every cast and extruded component is machined here for final precision.

Powder coating in-house

Our own line — coated, cured and inspected to exact RAL specifications, so finishes match across a project and across repeat orders.

See all fifteen processes  ·  Browse the full catalogue