Solar Street Lights · Made in India

Solar street lighting,
engineered to last a decade.

True-wattage LED street lights with MPPT charging, BIS-certified LiFePO4 batteries and remote-set dimming — built for ten years of dusk-to-dawn service, not the under-rated plastic imports that fill the market.

Enlighten Pro solar street light

Enlighten Pro vs the cheap import

Two lights. Same label.
Not the same product.

Most "50 W" or "100 W" solar street lights sold today are nothing of the sort. Here is what actually separates a fixture that lasts a decade from one that fails inside two years.

Specification
Enlighten Pro
Typical market light
Housing
Die-cast aluminium — rigid, heat-shedding
Plastic body — warps and yellows outdoors
LED package
5050 SMD with EMC protection
Small 2835 SMD chips
Light output (efficacy)
140–160 lumens per watt
90–100 lumens per watt
Rated wattage
True — a 50 W light draws a full 50 W
Inflated — a "50 W" light often delivers 10–20 W
Charge controller
MPPT · 95%+ efficient, IEC certified
PWM · ~80% efficient, fails in 1–2 years
Battery
LiFePO4 lithium · BIS certified
Uncertified or mixed cells
Solar panel
Oversized vs the load — rides out cloudy days
Matched or undersized — dies in bad weather
Control
Remote + factory-set dimming schedule
None — fixed output, no adjustment
Warranty
3 years on the fixture, extendable to 5
Short, or none that survives a claim

The numbers

Where the gap shows up.

Two same-labelled lights can perform worlds apart. The difference is in the LED chip, the charge controller, and whether the wattage on the box is real.

LED efficacy

Usable light produced per watt of power — higher is brighter and cooler-running.

Enlighten Pro · 5050 EMC LED140–160 lm/W
Typical · 2835 LED90–100 lm/W

Charge controller efficiency

How much harvested solar energy actually reaches the battery.

Enlighten Pro · MPPT95%+
Typical · PWM~80%

What a "100 W" light actually delivers

Cheap lights pack the housing with tiny 2835 chips and label the count as wattage — 100 chips sold as "100 W". The real draw is a fraction of that.

Enlighten Pro — rated 100 W100 W delivered
Typical import — labelled 100 W~20 W delivered

Remote control & presets

Set it once. Change it any time.

Every Enlighten Pro solar street light ships with a controller that can be programmed by remote — at our factory before despatch, and again on site after installation.

100%
30%
6 PMMidnightSunrise

A typical factory preset — full power through the busy evening, dimmed through the quiet small hours.

Programmed to your site.

  • Factory presets. We set the dimming schedule before despatch — for example 100% from 6 PM to midnight, then 30% until sunrise — so the light arrives ready to run.
  • Adjust on site. With the remote, extend or shorten the full-power window, or change brightness — no ladder, no rewiring.
  • Stretch the runtime. Drop a 30 W light to 20% output and its battery autonomy rises by about a third, there and then.
  • Reconfigure after install. Even the battery voltage — 12 V or 24 V — can be switched by remote once the light is in place.

Built to last · Made in India

Specified for the long run.

Every component is chosen so the light is still working a decade after it goes up — through monsoons, heat and cloudy weeks.

Oversized panel

Two cloudy days, still lit

The mono-crystalline solar panel is rated higher than the luminaire it feeds. After a cloudy day or two the battery still carries the light through the night — two full nights of autonomy by design.

Safe lithium

BIS-certified LiFePO4

Lithium iron phosphate batteries — long cycle life, stable across a wide temperature band, and certified by the Bureau of Indian Standards.

Smart charging

IEC-certified MPPT

The MPPT charge controller harvests over 95% of available solar energy — far ahead of the ~80% PWM controllers that fail within a year or two.

True output

5050 LEDs, EMC protected

Larger 5050 SMD LEDs with EMC protection deliver 140–160 lm/W of genuine, rated light — wide 120°/145° coverage with no dark patches.

Sealed & rated

IP65 die-cast body

Dust-tight, jet-water rated die-cast aluminium, with reverse-polarity, short-circuit, low-voltage and over-temperature protection built in.

Approved supply

MNRE / BIS panel

MNRE and BIS-approved mono-crystalline panels, automatic dusk-to-dawn operation, and a 5–7 hour charge in good sunshine.

3 → 5 yr

Warranty that stands behind the fixture

The complete solar street light carries a 3-year warranty, extendable to 5 years. The mono-crystalline solar panel, the LiFePO4 battery and the MPPT controller each carry their own component warranty — ask us for the current terms on the model you're specifying.

Compliance & certifications

Tested. Marked. Certified.

The range

Three ways to light it.

From all-in-one fixtures to panel-separate systems and the inverters behind them — open any product for full models, ratings and specifications.

Loading the range…

Specify with confidence

Lighting a road, a campus
or a whole township?

Tell us the site and the hours you need — we'll size the wattage, the panel and the battery, pre-set the dimming schedule, and ship it ready to mount.