← Back to catalogue

EN-OD01F Star

Model code EN-OD01F

The chajja light. STAR was built for the hardest small job on an Indian façade — lighting the underside of a chajja three or four floors up, where the fitting is barely bigger than a coin and the monsoon arrives sideways. Seen from the street the narrow 30° beam breaks across the ledge and the fitting reads as a point of light with rays. That is where the name comes from.

The body is AL6063 aluminium extrusion, machined in-house and anodised. The gear compartment is fully potted in thermally conductive epoxy and the optic is sealed with RTV silicone — sealed for life rather than gasketed, because nothing at that height should ever need opening. GR Optics lens, Bridgelux LED array, Philips constant-current driver.

Two apertures, Ø46mm and Ø57mm, both 36mm deep — small enough to disappear into a soffit, a ledge, a porch ceiling or a lift-lobby transition, indoors or out.

MODELPOWERSIZEBODYEN-OD01F3WD46 × H36BLK / WH / GreyEN-OD01F6WD57 × H36BLK / WH / Grey
Aperture
Ø46mm (3W) · Ø57mm (6W)
Depth
36mm
Housing
Extruded aluminium AL6063, machined in-house, anodised
Optic
GR Optics precision lens · 30° beam
Light source
Bridgelux LED array
Driver
Philips constant-current, fully potted in thermally conductive epoxy
Sealing
RTV silicone lens seal · potted gear compartment (no service access)
IP rating
IP66 by construction — design rating, not third-party tested
Impact rating
IK08
CCT
3000K standard · 3500K / 4000K on request
CRI
≥80
Life
50,000h (L70)
Mounting
Surface · soffit / chajja underside

Specifications — typical, family defaults

Input voltage
220–240 V AC
Operating temperature
−20 °C → +45 °C
Warranty
2 years

Exact values vary by model and wattage — request the variant datasheet for certified figures.

EN-OD01F Star

Applications

Mounting

Browse the full Enlighten Pro catalogue